From 921630d6aad1c6f8cd51a7d0007cc4e09c39a140 Mon Sep 17 00:00:00 2001
From: Karan Shukla <karan_shukla@live.com>
Date: Tue, 28 Jul 2026 07:26:12 -0400
Subject: [PATCH] config: enable Wildcat Lake in LPMD

---
 data/Makefile.am                   |   3 +-
 data/intel_lpmd_config_F6_M213.xml | 229 +++++++++++++++++++++++++++++
 src/lpmd_cpu.c                     |   1 +
 3 files changed, 232 insertions(+), 1 deletion(-)
 create mode 100644 data/intel_lpmd_config_F6_M213.xml

diff --git a/data/Makefile.am b/data/Makefile.am
index a67bfde..3826765 100644
--- a/data/Makefile.am
+++ b/data/Makefile.am
@@ -32,7 +32,8 @@ lpmd_config_DATA = \
 	  intel_lpmd_config_F6_M170.xml \
 	  intel_lpmd_config_F6_M181.xml \
 	  intel_lpmd_config_F6_M189.xml \
-	  intel_lpmd_config_F6_M204.xml
+	  intel_lpmd_config_F6_M204.xml \
+	  intel_lpmd_config_F6_M213.xml
 
 EXTRA_DIST = \
 	intel_lpmd.service.in \
diff --git a/data/intel_lpmd_config_F6_M213.xml b/data/intel_lpmd_config_F6_M213.xml
new file mode 100644
index 0000000..0d84131
--- /dev/null
+++ b/data/intel_lpmd_config_F6_M213.xml
@@ -0,0 +1,229 @@
+<?xml version="1.0"?>
+
+<!--
+Intel Energy Optimizer (LPMD) configuration for Wildcat Lake
+(family 6, model 0xD5 / 213).
+
+  Performance (PerformanceDef=-1) -> LPMD_OFF  -> all CPUs active (P+L)
+  Balanced    (BalancedDef= 0)    -> LPMD_AUTO -> L-cores only (P-cores parked)
+  Powersaver  (PowersaverDef= 1)  -> LPMD_ON   -> L-cores only (forced)
+
+Design: verified on an Intel Core 5 320 (2 P-cores, 15W TDP) via the
+daemon's own CPUID-based core-type detection (lpmd_cpu.c:detect_cpu_topo,
+which classifies atom-type cores as E vs L by whether their CPUID leaf 4
+reports an L3 slice): "Detected 2 Pcores, 0 Ecores, 4 Lcores, TDP 15W".
+All 4 non-P cores land in the L tier, not E — there is no full E-core
+tier on this sample, only P + L. This does NOT match what /sys/devices
+alone would suggest: /sys/devices/cpu_core/cpus (0-1) and
+/sys/devices/cpu_atom/cpus (2-5) only distinguish big/little, not the
+E-vs-L split the daemon's own cache-topology probe makes, and lscpu -e's
+L2-instance grouping (cores 2-5 sharing one L2 cluster) looks superficially
+like a single Skymont-style E-core module. Trust the daemon's own
+detect_cpu_topo() output over either of those when writing a config for
+this model — an earlier draft of this file used ActiveEcores=ALL, which
+would have resolved to an empty CPU set at runtime and left Balanced/
+Powersaver mode with zero active cores.
+
+All WLT states use ActiveLcores=ALL (topology-portable, not hardcoded CPU
+numbers). EPP/EPB vary per WLT state to spread the power-performance
+tradeoff across the L-core set. If the user wants P-cores, they select
+Performance mode or disable LPMD.
+-->
+
+<Configuration>
+	<!--
+		CPU format example: 1,2,4..6,8-10
+		Used by the force-on path (PowersaverDef=1).
+	-->
+	<lp_mode_cpus></lp_mode_cpus>
+
+	<!--
+		EPP to use in Low Power Mode
+		0-255: Valid EPP value to use in Low Power Mode
+		   -1: Don't change EPP in Low Power Mode
+		Left empty: LPMD does not override EPP — it stays under
+		PPD (power-profiles-daemon) control.
+	-->
+	<lp_mode_epp></lp_mode_epp>
+
+	<!--
+		Mode values
+		0: Cgroup v2
+		1: Cgroup v2 isolate
+		2: CPU idle injection
+	-->
+	<Mode>1</Mode>
+
+	<!--
+		Default behavior when Performance power setting is used
+		-1: force off. (Never enter Low Power Mode)
+		 1: force on. (Always stay in Low Power Mode)
+		 0: auto. (opportunistic Low Power Mode enter/exit)
+	-->
+	<PerformanceDef>-1</PerformanceDef>
+
+	<!--
+		Default behavior when Balanced power setting is used
+		-1: force off. (Never enter Low Power Mode)
+		 1: force on. (Always stay in Low Power Mode)
+		 0: auto. (opportunistic Low Power Mode enter/exit)
+	-->
+	<BalancedDef>0</BalancedDef>
+
+	<!--
+		Default behavior when Power saver setting is used
+		-1: force off. (Never enter Low Power Mode)
+		 1: force on. (Always stay in Low Power Mode)
+		 0: auto. (opportunistic Low Power Mode enter/exit)
+	-->
+	<PowersaverDef>1</PowersaverDef>
+
+	<!--
+		Use HFI LPM hints
+		0 : No
+		1 : Yes
+	-->
+	<HfiLpmEnable>0</HfiLpmEnable>
+
+	<!--
+		Use WLT hints
+		0 : No
+		1 : Yes
+	-->
+	<WLTHintEnable>1</WLTHintEnable>
+
+	<!--
+		Use WLT hint Poll enable
+		0 : No
+		1 : Yes
+	-->
+	<WLTHintPollEnable>1</WLTHintPollEnable>
+
+	<!--
+		Use HFI SUV hints
+		0 : No
+		1 : Yes
+		NOTE: SUV mode support was removed from the daemon (May 2025).
+		The parser accepts this element but discards the value.
+		Kept here for forward compatibility if the feature is restored.
+	-->
+	<HfiSuvEnable>0</HfiSuvEnable>
+
+	<!--
+		WLT hint mask: ANDed with the raw hardware WLT hint before
+		matching against each state's WLTType.
+		15 (0x0F) keeps the low 4 bits, which covers the defined
+		WLT classifications (0=Idle, 1=Battery Life, 2=Sustained, 3=Bursty).
+	-->
+	<WLTHintMask>15</WLTHintMask>
+
+	<!--
+		Global utilization thresholds (0-100). Used by the legacy
+		UTIL_POWER fallback path when no per-state <States> config
+		exists. Since this config defines <States>, these globals
+		are not consumed — kept for documentation only.
+
+		Disabled here: in AUTO mode, all states resolve to the same
+		L-core set (P-cores always parked), so load-based exit is
+		unnecessary — the CPU mask never changes, only EPP/EPB
+		varies by WLT state.
+
+		<util_entry_threshold>10</util_entry_threshold>
+		<util_exit_threshold>95</util_exit_threshold>
+	-->
+
+	<!--
+		EntryDelayMS / ExitDelayMS / EntryHystMS / ExitHystMS are
+		currently parsed but have no runtime effect. Omitted here.
+	-->
+
+	<!--
+		Ignore ITMT setting during LP-mode enter/exit
+		0: disable ITMT upon LP-mode enter and re-enable ITMT upon LP-mode exit
+		1: do not touch ITMT setting during LP-mode enter/exit
+
+		lpmd parks P-cores via cgroup isolation; ITMT tells the scheduler
+		to *prefer* P-cores, the opposite of what LPM does here. Kept at
+		0 for consistency with upstream configs (F6_M170/189/204/197).
+	-->
+	<IgnoreITMT>0</IgnoreITMT>
+
+	<!--
+		SoC Power Slider (BalancedSliderAC/DC, SliderOffsetAC/DC): omitted.
+		Not yet confirmed present on Wildcat Lake via the int340x thermal
+		driver on this sample; can be added once verified on hardware that
+		exposes the slider mailbox. See F6_M204 (Panther Lake) for the
+		values to model if/when confirmed.
+	-->
+
+	<!--
+		WorkLoad Type hint states for Wildcat Lake.
+
+		P-cores are NEVER activated in Balanced/AUTO or Powersaver mode —
+		this platform's only lower tier is the L-core set (see topology
+		note above: detect_cpu_topo() classifies all 4 non-P cores as L,
+		not E). All states use ActiveLcores=ALL (resolved at runtime to
+		the actual L-core mask) so this is topology-portable, not
+		hardcoded to specific CPU numbers.
+
+		EPP/EPB are differentiated per WLT state so the L-cores operate
+		on a power-performance spectrum under Speed Shift / Thread
+		Director control:
+
+		  UTIL_IDLE (WLT 0+1): EPP=192 "balance_power", EPB=8
+		    Idle or unclassified workload. Power-biased but the L-cores
+		    can still respond to light interactive tasks.
+
+		  UTIL_IDLE_SUSTAIN (WLT 2): EPP=64, EPB=4
+		    Sustained compute. Lets the L-cores boost for real work
+		    while P-cores stay parked.
+
+		  UTIL_IDLE_BURSTY (WLT 3): EPP=128 "balance_performance", EPB=6
+		    Bursty spikes. Moderate — L-cores absorb bursts without
+		    sustaining high power draw.
+
+		WLTTypeMask=3 on UTIL_IDLE merges WLT=0 (WLT_IDLE / deep idle)
+		and WLT=1 (WLT_BATTERY_LIFE / light usage) into one state, since
+		the hardware oscillates between the two rapidly (~2x/sec
+		observed on other hybrid platforms in this family) and splitting
+		them would cause needless sysfs write churn for no real EPP/EPB
+		benefit. See F6_M197 (Arrow Lake-H) for the full rationale.
+
+		Invalid/out-of-range WLT values (e.g. WLT_INVALID=4) match no
+		state; the daemon holds its current state unchanged rather than
+		falling back to a wildcard.
+	-->
+	<States>
+		<CPUFamily> 6 </CPUFamily>
+		<CPUModel> 213 </CPUModel>
+		<CPUConfig> * </CPUConfig>
+		<State>
+			<ID> 1 </ID>
+			<Name> UTIL_IDLE </Name>
+			<WLTTypeMask> 3 </WLTTypeMask>
+			<ActiveLcores>ALL</ActiveLcores>
+			<IRQMigrate>1</IRQMigrate>
+			<EPP>192</EPP>
+			<EPB>8</EPB>
+		</State>
+		<State>
+			<ID> 2 </ID>
+			<Name> UTIL_IDLE_SUSTAIN </Name>
+			<WLTType> 2 </WLTType>
+			<ActiveLcores>ALL</ActiveLcores>
+			<IRQMigrate>1</IRQMigrate>
+			<EPP>64</EPP>
+			<EPB>4</EPB>
+		</State>
+		<State>
+			<ID> 3 </ID>
+			<Name> UTIL_IDLE_BURSTY </Name>
+			<WLTType> 3 </WLTType>
+			<ActiveLcores>ALL</ActiveLcores>
+			<IRQMigrate>1</IRQMigrate>
+			<EPP>128</EPP>
+			<EPB>6</EPB>
+		</State>
+	</States>
+
+</Configuration>
diff --git a/src/lpmd_cpu.c b/src/lpmd_cpu.c
index f4c9cbd..11341bf 100644
--- a/src/lpmd_cpu.c
+++ b/src/lpmd_cpu.c
@@ -26,6 +26,7 @@ static struct cpu_model_entry id_table[] = {
 		{ 6, 0xb5 }, // ArrowLake
 		{ 6, 0xbd }, // Lunarlake
 		{ 6, 0xcc }, // Pantherlake
+		{ 6, 0xd5 }, // Wildcatlake
 		{ 0, 0 } // Last Invalid entry
 };