diff --git a/docs/documentation/enums.md b/docs/documentation/enums.md
index ddb5fc7..9e495cc 100644
--- a/docs/documentation/enums.md
+++ b/docs/documentation/enums.md
@@ -127,3 +127,7 @@
     rendering:
         show_root_heading: false
         show_source: true
+
+## working_plane_exit_view
+
+::: cadwork.working_plane_exit_view
diff --git a/pyproject.toml b/pyproject.toml
index e3e10c6..87855f5 100644
--- a/pyproject.toml
+++ b/pyproject.toml
@@ -1,6 +1,6 @@
 [project]
 name = "cwapi3d"
-version = "33.328.0"
+version = "33.330.0"
 
 authors = [{ name = "Cadwork", email = "it@cadwork.ca" }]
 requires-python = ">= 3.14"
diff --git a/src/bim_controller/__init__.pyi b/src/bim_controller/__init__.pyi
index 3e5631d..8f1c556 100644
--- a/src/bim_controller/__init__.pyi
+++ b/src/bim_controller/__init__.pyi
@@ -483,3 +483,25 @@ def get_elements_for_storey(building: str, storey: str) -> list[ElementId]:
     Returns:
         The list of element ids assigned to the storey.
     """
+
+def export_ifc4(element_id_list: list[ElementId], file_path: str) -> bool:
+    """Exports an IFC 4 file.
+
+    Parameters:
+        element_id_list: A list of element ids to be included in the export.
+        file_path: The path where the IFC file will be exported.
+
+    Returns:
+        True if the export was successful, false otherwise.
+    """
+
+def export_ifc2x3(element_id_list: list[ElementId], file_path: str) -> bool:
+    """Exports an IFC 2x3.
+
+    Parameters:
+        element_id_list: A list of element ids to be included in the export.
+        file_path: The path where the IFC file will be exported.
+
+    Returns:
+        True if the export was successful, false otherwise.
+    """
diff --git a/src/cadwork/__init__.pyi b/src/cadwork/__init__.pyi
index 798f824..637c96a 100644
--- a/src/cadwork/__init__.pyi
+++ b/src/cadwork/__init__.pyi
@@ -90,6 +90,7 @@ from .standard_element_type import standard_element_type as standard_element_typ
 from .text_element_type import text_element_type as text_element_type
 from .vba_catalog_item_type import vba_catalog_item_type as vba_catalog_item_type
 from .weinmann_mfb_version import weinmann_mfb_version as weinmann_mfb_version
+from .working_plane_exit_view import working_plane_exit_view as working_plane_exit_view
 
 __all__ = [
     # Type aliases
@@ -171,6 +172,7 @@ __all__ = [
     "text_element_type",
     "vba_catalog_item_type",
     "weinmann_mfb_version",
+    "working_plane_exit_view",
     # Module-level functions
     "get_auto_attribute_elements",
     "set_auto_attribute",
diff --git a/src/cadwork/working_plane_exit_view.pyi b/src/cadwork/working_plane_exit_view.pyi
new file mode 100644
index 0000000..aed102b
--- /dev/null
+++ b/src/cadwork/working_plane_exit_view.pyi
@@ -0,0 +1,26 @@
+from enum import IntEnum, unique
+
+
+@unique
+class working_plane_exit_view(IntEnum):
+    """working plane exit view
+
+    Examples:
+        >>> cadwork.working_plane_exit_view.previous_view
+        previous_view
+    """
+    previous_view = 0
+    """Restores the view and controller active before entering."""
+    standard_axonometry = 1
+    """Standard axonometry."""
+    view_positive_x = 2
+    """Same view as showViewPositiveX(). GUI label "X"."""
+    view_positive_y = 3
+    """Same view as showViewPositiveY(). GUI label "-Y"."""
+    view_positive_z = 4
+    """Same view as showViewPositiveZ(). GUI label "Z"."""
+    keep_current_camera = 5
+    """Keeps the current camera, in 3d. GUI label "Axo same view"."""
+
+    def __int__(self) -> int:
+        return self.value
diff --git a/src/element_controller/__init__.pyi b/src/element_controller/__init__.pyi
index f84ac66..503c152 100644
--- a/src/element_controller/__init__.pyi
+++ b/src/element_controller/__init__.pyi
@@ -2457,4 +2457,20 @@ def create_rotation_element(surface_element_id: ElementId, axis_point: point_3d,
 
     Returns:
         The ID of the created rotation element.
-    """
\ No newline at end of file
+    """
+
+def apply_image_to_surface(element: ElementId, image_file_path: str, alignment_start: point_3d, alignment_end: point_3d) -> bool:
+    """Applies an image texture to a specified surface element. This function allows you to set an image as a texture on a given surface element. The image is mapped to the surface between two specified points that define the alignment and scaling.
+
+    Parameters:
+        element: Surface element
+        image_file_path: The file path to the image to be applied. Supported formats include `.jpg`, `.png`, `.bmp`, and `.tif`. Path example: `LR"(C:/path/to/Image.png)"`.
+        alignment_start: The starting alignment point for mapping the image on the surface.
+        alignment_end: The ending alignment point for mapping the image on the surface.
+
+    Note:
+        Ensure that the file path is valid and accessible, and that the surface element exists Proper error handling for invalid inputs is recommended.
+
+    Returns:
+        Returns `true` if the image was successfully applied to the surface; otherwise, returns `false` in case of failure. Failures can occur due to invalid file paths, unsupported formats, or issues with the surface element.
+    """
diff --git a/src/file_controller/__init__.pyi b/src/file_controller/__init__.pyi
index 9069e23..423a4d5 100644
--- a/src/file_controller/__init__.pyi
+++ b/src/file_controller/__init__.pyi
@@ -602,3 +602,14 @@ def set_webgl_hierarchy(stage: int, attribute: display_attribute) -> None:
         stage: The hierarchy stage to set.
         attribute: The display attribute to use for the hierarchy.
     """
+
+
+def export_step_file_ex(element_list: list[ElementId], file_path: str, scale_factor: float, substract_drillings: bool) -> None:
+    """Exports a STEP file with new algorithm.
+
+    Parameters:
+        element_list: The list of element id to export.
+        file_path: The output file path.
+        scale_factor: The file scale factor.
+        substract_drillings: Substract drillings.
+    """
diff --git a/src/geometry_controller/__init__.pyi b/src/geometry_controller/__init__.pyi
index 83a446e..9efd7de 100644
--- a/src/geometry_controller/__init__.pyi
+++ b/src/geometry_controller/__init__.pyi
@@ -11,6 +11,7 @@ to create or destroy it.
 from cadwork.api_types import ElementId, UnsignedInt
 from cadwork.facet_list import facet_list
 from cadwork.point_3d import point_3d
+from cadwork.division_zone_direction import division_zone_direction
 
 
 def rotate_height_axis_90(element_id_list: list[ElementId]) -> None:
@@ -931,3 +932,41 @@ def get_length_including_end_types(element_id: ElementId) -> float:
     Returns:
         The element length including end-types.
     """
+
+def create_division_zone(element_id: ElementId, point: point_3d, direction: division_zone_direction) -> None:
+    """Creates a division zone.
+
+    Parameters:
+        element_id: The element Id.
+        point: The division zone point.
+        direction: The division zone direction.
+    """
+
+def delete_division_zone(element_id: ElementId) -> None:
+    """Deletes a division zone.
+
+    Parameters:
+        element_id: The element Id.
+    """
+
+def get_division_zone_points(element_id: ElementId) -> list[point_3d]:
+    """Gets the division zone points.
+
+    Parameters:
+        element_id: The element Id.
+
+    Returns:
+        The division zone points.
+    """
+
+def stretch_facet(element_id: ElementId, facet_index: UnsignedInt, distance: float) -> bool:
+    """Moves one facet of an element along its own plane normal, growing or shrinking the body at that face.
+
+    Parameters:
+        element_id: The element to modify.
+        facet_index: Index into the element's facet list in the same order getElementFacets An element with no facets fails. The index is only valid against a facet table read from the element in its CURRENT state: a successful stretch renumbers the list, because the geometry kernel rebuilds the body's face order after every local operation. To move several facets of one element, re-read getElementFacets after each call and re-locate the next facet by its normal - carrying indices 0..count-1 across a loop will address the same facet twice and miss others.
+        distance: Signed travel in model units (mm) along the normal getElementFacets reports for this facet index: positive grows the body at that face, negative shrinks it, zero is a successful no-op that leaves the geometry untouched.
+
+    Returns:
+        Whether the facet was moved. - true: the facet moved (or the distance was zero) and the element is marked modified - false: nothing was modified — a distinct code and message are on the error stack, readable via getLastError, and logged to the cadwork API log
+    """
diff --git a/src/list_controller/__init__.pyi b/src/list_controller/__init__.pyi
index 4822982..c23c01a 100644
--- a/src/list_controller/__init__.pyi
+++ b/src/list_controller/__init__.pyi
@@ -127,3 +127,11 @@ def export_cover_list_with_settings(element_id_list: list[ElementId], file_path:
         file_path: The path of the target file for the export.
         settings_file_path: The path to the settings file to be used for export.
     """
+
+def export_container_list(element_id_list: list[ElementId], export_file_path: str) -> None:
+    """Exports a container list.
+
+    Parameters:
+        element_id_list: The element list id.
+        export_file_path: The exported file path.
+    """
diff --git a/src/multi_layer_cover_controller/__init__.pyi b/src/multi_layer_cover_controller/__init__.pyi
index 012e8cf..d790ef0 100644
--- a/src/multi_layer_cover_controller/__init__.pyi
+++ b/src/multi_layer_cover_controller/__init__.pyi
@@ -602,4 +602,94 @@ def create_multi_layer_solid_wall(set_name: str) -> MultiLayerSetId:
 
     Returns:
         The multi layer set id.
-    """
\ No newline at end of file
+    """
+
+def get_multi_layer_set_component_type(set_id: MultiLayerSetId) -> int:
+    """Gets the multi layer set component type.
+
+    Parameters:
+        set_id: The multi layer set id.
+
+    Returns:
+        The multi layer set component type.
+    """
+
+def set_multi_layer_set_component_type(set_id: MultiLayerSetId, type: int) -> None:
+    """Sets the multi layer set component type.
+
+    Parameters:
+        set_id: The multi layer set id.
+        type: The multi layer set component type.
+    """
+
+def get_layer_sub_type(set_id: MultiLayerSetId, layer_index: UnsignedInt) -> int:
+    """Gets the layer sub type.
+
+    Parameters:
+        set_id: The multi layer set id.
+        layer_index: The layer index.
+
+    Returns:
+        The layer sub type.
+    """
+
+def set_layer_sub_type(set_id: MultiLayerSetId, layer_index: UnsignedInt, sub_type: int) -> None:
+    """Sets the layer sub type.
+
+    Parameters:
+        set_id: The multi layer set id.
+        layer_index: The layer index.
+        sub_type: The layer sub type.
+    """
+
+def get_layer_standard_panel_guid(set_id: MultiLayerSetId, layer_index: UnsignedInt) -> str:
+    """Gets the layer standard panel guid.
+
+    Parameters:
+        set_id: The multi layer set id.
+        layer_index: The layer index.
+
+    Returns:
+        The layer standard panel guid.
+    """
+
+def set_layer_standard_panel_guid(set_id: MultiLayerSetId, layer_index: UnsignedInt, guid: str) -> None:
+    """Sets the layer standard panel guid.
+
+    Parameters:
+        set_id: The multi layer set id.
+        layer_index: The layer index.
+        guid: The layer standard panel guid.
+    """
+
+def get_layer_standard_beam_guid(set_id: MultiLayerSetId, layer_index: UnsignedInt) -> str:
+    """Gets the layer standard beam guid.
+
+    Parameters:
+        set_id: The multi layer set id.
+        layer_index: The layer index.
+
+    Returns:
+        The layer standard beam guid.
+    """
+
+def set_layer_standard_beam_guid(set_id: MultiLayerSetId, layer_index: UnsignedInt, guid: str) -> None:
+    """Sets the layer standard beam guid.
+
+    Parameters:
+        set_id: The multi layer set id.
+        layer_index: The layer index.
+        guid: The layer standard beam guid.
+    """
+
+def add_layer_by_standard_elements(set_id: MultiLayerSetId, type: multi_layer_type, name: str, panel_guid: str, beam_guid: str, thickness: float) -> None:
+    """Adds layer by standard element.
+
+    Parameters:
+        set_id: The multi layer set id.
+        type: The multi layer set component type.
+        name: The layer name.
+        panel_guid: The layer standard panel guid.
+        beam_guid: The layer standard beam guid.
+        thickness: The layer thickness.
+    """
diff --git a/src/visualization_controller/__init__.pyi b/src/visualization_controller/__init__.pyi
index 46b9ad7..6563988 100644
--- a/src/visualization_controller/__init__.pyi
+++ b/src/visualization_controller/__init__.pyi
@@ -11,6 +11,7 @@ from cadwork.camera_data import camera_data
 from cadwork.point_3d import point_3d
 from cadwork.api_types import *
 from cadwork.rgb_color import rgb_color
+from cadwork.working_plane_exit_view import working_plane_exit_view
 
 def set_color(element_id_list: list[ElementId], color_id: ColorId) -> None:
     """Sets the element color.
@@ -441,4 +442,45 @@ def display_bitmaps_as_texture_representation_in_shaded2(flag: bool) -> None:
 
     Parameters:
         flag: True to display bitmaps as textures in shaded 2, false otherwise.
-    """
\ No newline at end of file
+    """
+
+def leave_working_plane(exit_view: working_plane_exit_view) -> None:
+    """Leaves the 2d working plane and restores a 3d view. Does nothing when the 2d working plane is not currently active.
+
+    Parameters:
+        exit_view: The 3d view to restore on leaving.
+
+    Note:
+        When the working plane was entered from inside a container block, only workingPlaneExitView::previous_view returns into that container block; every other value leaves it and switches to the plain 3d model view.
+    """
+
+def is_permanently_hidden(element_id: ElementId) -> bool:
+    """Tests whether an element is permanently hidden.
+
+    Parameters:
+        element_id: The element id.
+
+    Returns:
+        True if the element is permanently hidden, false otherwise, and false when the id does not resolve to an element.
+    """
+
+def hide_permanently(element_id_list: list[ElementId]) -> None:
+    """Takes elements out of the model's working set and keeps them there.
+
+    Parameters:
+        element_id_list: The elements to hide permanently.
+    """
+
+def show_permanently_hidden(element_id_list: list[ElementId]) -> None:
+    """Brings elements this API hid permanently back into the working set.
+
+    Parameters:
+        element_id_list: The elements to show again.
+    """
+
+def get_permanently_hidden_elements() -> list[ElementId]:
+    """Gets the elements this API hid permanently and has not shown again.
+
+    Returns:
+        The permanently hidden elements owned by this API, empty when there are none.
+    """